Institute of Science and Technology

a center of excellence for education
Institute of Science and Technology

a center of excellence for education

Abu Hena Md. Mustafa Kamal

Assistant Professor

Department of Electronics and Communication Engineering

Academic Background

DegreePassing YearInstitute / BoardResult
P.hdOngoingIslamic University of Technology (IUT)CGPA- 4.00 out of 4.00 (First Semester Completed)
Master of Science in Electrical and Electronic Engineering2018Islamic University of Technology (IUT)CGPA- 3.67 out of 4.00
Bachelor of Science in Electrical and Electronic Engineering2013Islamic University of Technology (IUT)CGPA- 3.85 out of 4.00

Research Areas

  • Power Electronics: Power Semiconductor Devices, Power Management ICs, Electric Machines and Drives
  • Biomedical Engineering: Elasticity imaging, Tissue modeling, Breast cancer detection
  • Nanotechnology: Single electron transistor (SET), Carbon nanotube (CNT)
  • Renewable Energy Systems: Photovoltaic, fuel cell, wind, distributed generation systems

Biography

I, Abu Hena Md. Mustafa Kamal, pursuing Ph.D. degree in the Department of Electrical and Electronic Engineering with an emphasis in Power Electronics at Islamic University of Technology (IUT). The initiation of my formal electrical and electronic engineering education occurred when I enrolled for undergraduate and later on for postgraduate studies at IUT. I found this the best place to strengthen, cultivate and evolve my engineering knowledge. Basic and advanced engineering courses helped lay a solid foundation to my electrical and electronic engineering career. For M.Sc. degree requirements I have done my thesis with major focus on image processing in the field of biomedical engineering. In my thesis I needed to learn about software simulation, making various tissue models, working with experimental data and pragmatic decision making through simulation results. The analytical attributes and persistence required for such a research make me confident that I have the aptitude necessary to cope with the rigors of graduate research.

Throughout my undergraduate studies I remained steadfast in my resolve to attain excellence in academics and research. This resolve paid rich dividends and I graduated with a CGPA of 3.85 out of 4.00. After graduation, I had the opportunity of joining Aeronautical Engineering Department of Cambrian International College of Aviation as a Lecturer. Currently, I am working as a Lecturer in the Department of Electronics and Communication Engineering (ECE) of Institute of Science and Technology (IST), (Affiliated with National University of Bangladesh). I am teaching several engineering courses such as Industrial and Power Electronics, Biomedical Instruments, Control Systems, High Speed Telecommunication, Electronic Materials, Fundamentals of Communications, Digital Electronics-I, Electronic Devices and Circuits, Fundamentals of Electrical and Electronic Engineering, Differential and Integral Calculus, Computer Architecture etc. in my seven years of teaching career. Now I am also acting as a coordinator of ECE department of IST. I find distinct joy in teaching as I see my students eagerly and proactively grasping on to various concepts. During the period of time as a faculty member I feel that my leadership qualities are developing and I am being able to motivate my students towards research and exploration. I believe my professional goals as an academic and researcher can be further realized upon attainment of post graduate degrees. As faculty member of the Dept. of ECE, IST, I have been actively involved in some research activities in the field of Power Electronics, Biomedical Engineering, Nanotechnology, Renewable Energy etc. I realize that publication of research is paramount. I am trying to develop new publication ideas and proactively working with my colleagues for publications. I have co-authored two research papers in international journals, six research papers in local journals and six research papers in conferences.

Publications

  1. Md. Taslim Reza, Abu Hena Md. Mustafa Kamal, Muhammad Rezaul Hoque Khan and Mohammad Rakibul Islam, “Young’s Modulus Distribution Prediction Analysis of Elasticity Imaging Technique Based on Location of Tumors”, International Journal of Computer Science and Network Security (IJCSNS), vol.18, no.8, August 2018

  2. Abu Hena Md. Mustafa Kamal, Mohammad Ali, Md. Rakib Hossain and Md. Abdul Mazid, “Modeling of Breast Tissue with Tumor Inclusion,” IST Journal on Business and Technology (ISTJBT), vol. 8, no. 1, pp- 21-26, June 2017

  3. Runa Rukshana Khan, Abu Hena Md. Mustafa Kamal and Mohammad Ali, “Role of Solar Rickshaw in Bangladesh: Design and Implementation Issues,” International Journal of Electronics, Electrical and Computational System (IJEECS), vol. 5, no. 9, pp- 34-36, September 2016

  4. Palash Hawee, Abu Hena Md. Mustafa Kamal, Rakib Hossain and Runa Rukshana Khan, “Design and Improvement of Efficiency for Sun Tracking Solar Panel,” IST Journal on Business and Technology (ISTJBT), vol. 9, no. 1, pp- 96-102, June 2019

  5. Khadija Akter, Abu Hena Md. Mustafa Kamal, Mohammad Ali and Runa Rukshana Khan, “Design, Development and Implementation of an Intelligent Soil Analyzer,” IST Journal on Business and Technology (ISTJBT), vol. 9, no. 1, pp- 90-95, June 2019

  6. Mohammad Ali, Md. Rakib Hossain, Abu Hena Md. Mustafa Kamal and Khalilur Rahman, “PWM and Bluetooth Based Home Automation Systems,” IST Journal on Business and Technology (ISTJBT), vol. 9, no. 1, pp- 17-26, June 2019

  7. Runa Rukshana Khan, Mohammad Ali , Rakib Hossain and Abu Hena Md. Mustafa Kamal, “Next Generation Networks: A Continuous Approach Towards Goal,” IST Journal on Business and Technology (ISTJBT), vol. 8, no. 1, pp- 16-20, June 2017

  8. Md. Rakib Hossain, Mohammad Ali, Abu Hena Md. Mustafa Kamal and Md. Abdul Mazid,  “Design and Development of Bluetooth Based Home Automation,” IST Journal on Business and Technology (ISTJBT), vol. 8, no. 1, pp- 27-31, June 2017.

Conference Papers

  1. Abu Hena Md. Mustafa Kamal and Md. Taslim Reza, “Error Analysis of Elasticity Imaging Technique Based on Depth from the Transducer,” International Conference on Physics – 2018, 08-10 March, 2018, Dhaka, Bangladesh
  2. Abu Hena Md. Mustafa Kamal, “Developing Error Pattern of Elasticity Imaging Technique to Make the Modulus Reconstruction Process Robust”, 3rd Young Scientist Congress, National Museum of Science and Technology Bhaban, Dhaka, Bangladesh, 14-15 September 2018
  3. Ahmed Shariful Alam, Abu Hena Md. Mustafa Kamal, Md. Abdur Rahman, “Single Electron Transistors (SET) substituting MOSFETs to Reduce Power Consumption of an Inverter Circuit”, International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), May 20-21, 2015, Dhaka, Bangladesh
  4. Ahmed Shariful Alam, Md. Abdur Rahman, Abu Hena Md. Mustafa Kamal and Md. Salek Mahmud, “SET based low power consuming digital circuits,” International Conference on Electrical and      Computer Engineering (ICECE), 20-22 Dec. 2014, Dhaka, Bangladesh
  5. Khadija Akter and Abu Hena Md. Mustafa Kamal,  “An analysis to identify the effect of climate change on seasonal crop list,” 3rd Young Scientist Congress, National Museum of Science and Technology Bhaban, Dhaka, Bangladesh, 14-15 September 2018
  6. Abu Hena Md. Mustafa Kamal and Nusrat Jahan Sadia, “Modeling and Circuit Implementation of Single Electron Transistor (SET),” 4th Young Scientist Congress, National Museum of Science and Technology Bhaban, Dhaka, Bangladesh 13-15 December 2019